Troubleshooting of Plastic Pulverizer
Because the working environment of the plastic grinder is very harsh, if there is any improper operation during the working process, equipment malfunction problems may arise. So, how to eliminate the malfunction of the plastic grinder?
Troubleshooting of Plastic Pulverizer
1、 Ensure the normal working load of the plastic grinder:
Be careful not to exceed the maximum load that the machine can withstand when using it. Attempt to ensure that the mechanical load is evenly increased or decreased, and the changes in mechanical load are relatively flat. Specifically, they are more evenly distributed, and the addition or reduction of materials should not exceed the feed to prevent motor and undulating working equipment.
2、 Ensure fair lubrication of the plastic grinder:
Normal and fair lubrication is an effective measure to reduce mechanical failures.
3、 Timely maintenance of plastic grinding machines:
Machinery can cause various malfunctions during use. In these failures, the impact of mechanical equipment failures is very small, and some are more severe, even leading to machine crashes. Failures should be promptly addressed, and the so-called timely handling follows maintenance procedures. Machinery and various groups must be maintained and repaired on schedule according to requirements; During use, it should be strengthened
4、 Take accurate technical and organizational governance measures:
As the organization and management personnel and operators of industrial plastic milling machines and other milling machinery, it is necessary to pay attention to ensuring that the machinery is prevented from damage, deformation, erosion, etc. during transportation and storage; Strict daily maintenance of machinery to ensure that it is in good technical condition; To educate operators on the accurate use and operation of various engineering machinery, it is necessary to ensure accurate and fair maintenance on schedule and off schedule, maintain the cleanliness and cleanliness of the machinery, inspect the technical status of the machinery on schedule, promptly handle any abnormalities found, tighten and adjust loose and misaligned parts in a timely manner, and replace some vulnerable parts with preventive measures.