How does the rotational molding manufacturer explain how to correctly install the rotational molding?
To win the market, roller molding manufacturers must start with quality. As is well known, the quality of products is crucial to the survival of a company. Only by tightening the quality of products can a company win the recognition of consumers. Rolling molding manufacturers blindly offering profits will only put themselves in a passive situation. It is better to actively develop and produce excellent products, and use good products to truly win the favor of consumers.
The mold bracket structure of different types of rotational molding machines also varies. The common mold brackets are square shaped and disc spider web shaped. The mold brackets of swing machines and large direct fire rotary molding machines are different, which is a structure similar to that of concrete mixers. What we are going to talk about is the installation method of rolling molds on small and general rolling machines. The appropriateness and rationality of the rotational molding mold installed on the mold bracket directly affect the quality of the rotational molding product. This is also an important part of the rotational molding process that cannot be ignored.
Design of Rolling Mold
1. Selection of rotational molding molds. On the same rotational molding machine, if conditions permit, choose the same type of mold. If other products of different categories are to be produced at the same time, when selecting a rotational molding mold, it is important to ensure that the volume of the mold to be installed is similar, and the weight difference is not too significant. The thickness requirements of the rotational molding product are basically consistent. To avoid the phenomenon of product aging and degradation or residual plastic powder, as the processing cycles required for different rolling molds are different.
2. The spacing distance for the installation of the rotational molding mold. How many molds need to be installed on a mold bracket? This needs to be calculated, and sufficient distance should be left between the molds to avoid mutual obstruction, which is conducive to the conduction of hot air and also facilitates mold opening and closing.
3. Balancing the mold bracket. It is important to note that if the bracket is heavy on one side and light on the other, the rotation of the rolling machine will be affected. If it is light, it may cause uneven thickness of the product, and in severe cases, it may damage the rolling machine.
4. Pay attention to the diameter of the rotary molding machine oven, and calculate the rotation range when installing the mold, otherwise it may cause adverse consequences.
5. The fixation of rotational molding molds requires consideration of both firmness and speed of installation and disassembly during mold installation. Looking at the current large brand rotary mold manufacturers, the reason why they are strong is because there is consumer recognition of them, and why consumers love them is not yet a strict quality control. In fact, the level of the rotational mold brand market is also the level of quality. High quality products naturally have strong market competitiveness, while low-quality products will only be eliminated by the market!